Sunday 26 April 2020

Megasealed Balcony Nightmares


Fixing Ceiling Leaks For Good
Balconies are prone to leaks as they are exposed to the harsh Aussie elements all year round. If you suspect a leak in your balcony it is important to act fast. Call a Megasealed specialist to confirm you suspicions, because if you don’t it could end up costing you thousands down the track.
Balcony leaks are especially sinister as they often lead to ceiling leaks. Ultimately compromising the structural integrity of your home or apartment.
A rule of thumb for ceiling leaks is to get them repaired ASAP, in order to avoid unnecessary costs and safety hazards. Here are some tips from the pros to help you fix your leaking ceiling once and for all.

  1. Step one, understand that a ceiling leak is often a symptom of a balcony leak. A discoloured, damp, mouldy or musty smelling ceiling are all telltale signs of a leaking balcony.
  2. Step two, call Megasealed! We are trusted by strata managers nationwide to identify ceiling leaks and perform day-to-day leak repairs. Using our thermal leak detection technology we are able to take the guesswork out of identifying and remedying a leaking ceiling.
  3. Step three, relax as Megasealed specialise in the non-destructive repair of leaks. If you are on a tight budget and need to restore your ceiling or balcony then our Standard Service is perhaps the right fit for you. We degrout the entire balcony and inject Megabloc under the tiles to seal the damaged membrane. Then we regrout with our exclusive Megagrout Epoxy MG14, the strongest grout solution on the market.

    Our popular Tile Over Tile Service is also a crowd pleaser, and involves: priming, waterproofing and retiling the existing surface of your balcony. Megagrout Epoxy MG14 is installed into all floor joints, skirting tiles and fascia tiles followed by Megasealed Gold which is an extremely flexible sealant that can withstand structural movement. 

Megasealed should be your only option when it comes to leaking balcony repair and restoration. So call 1300 658 007 for a free in home quote today.




Where to Look for Professional Bathroom Waterproofing Solutions in Australia?


If you are trying to find a trustworthy professional waterproofing solution for your bathroom in Australia then come to Megasealed.

Megasealed is the only company in Australia who have 24 years experience providing excellent plumbing solutions to a wide variety of clients and businesses. Our expert technicians know exactly what they are doing and will never compromise on quality, because we understand the most important aspect of waterproofing is longevity.

With our personal record of providing efficient, best practice waterproofing services for both residential and commercial properties we know that waterproofing is essential, and here’s why:

1.    Prevention is always better than cure. Get your bathroom waterproofed and it will prevent you from further costs down the track.
2.    Leaks make a comfy home for bacteria as well as creepy-crawlies. Waterproofing your bathroom will ensure it’s creepy-crawly free!
3.    You won’t have to worry about cracking grout.
4.    It is visually more appealing.
5.    If we’ve learned anything from The Block, a waterproofed bathroom will increase your home’s market value.
6.    Not to mention, it’s inexpensive compared to the money you will have to spend on the maintenance of a non-waterproofed bathroom.

Megasealed offers exceptional bathroom tiling solutions to make your bathroom as leak free as possible. The reason why people continue to choose Megasealed when it comes to problem bathrooms is we don't cut corners, you get 110% quality service, 110% of the time.

If your bathroom is in need of some desperate attention but you don't have the time, call Megasealed on 1300 658 007 and get your free quote today.

Our locations include:
    Central Coast (NSW)
    North Shore & Beaches (Sydney)
    Eastern Suburbs (Sydney)
    Gold Coast
    Brisbane West

For a full list of areas we service visit Megasealed here.

Why Leak Detection Is Important?


Water leaks can lead to a lot of problems and wasting it is just one of them. You might think that there are no leaks in your house, but they are not always that easy to spot. Sometimes leaks occur internally, so they are invisible to the naked eye.  

There are a lot of reasons why detecting water leaks is extremely important:

1.     It’s expensive – We all pay for water and if it is leaking instead of being used than your money is being wasted. Another downside is that if you are not aware of the leak and a lot of time goes by then you might have to pay a lot to get it fixed. Don’t pay for the cost of delay, stay on top of leaks and catch them before they become a problem.

2.     It’s unhealthy – We use water for a lot of things right from cleaning to drinking. If pipes at your property are leaking, then the probability of contamination is high. Look for early signs of leakage including: discolored grout, smelly carpets, damp patches of paint, loose tiles and mould, in order to stay ahead of the leak. Furthermore, why put your health at risk when you can eliminate that possibility with our free leak/moisture assessment, where we provide you with a report on problem areas and a no obligation free quote should it be needed.

3.     It’s irresponsible – When there is a leak there is an increased chance of injury. By using our revolutionary thermal imaging technology, we can detect moisture intrusions without intrusive and expensive tile removal procedures. Megasealed also tracks its results so you and your family can enjoy your home’s balcony and bathroom with the peace of mind only thermal imaging can provide.

4.     Its damaging – Water leakage can lead to excess moisture, wood rot, growth of mould, attract bacteria, and cause the paint on the walls to chip off. Something as simple as a leaking pipe can cause the very foundations of your property and surrounding properties to be compromised.

Don’t take water leaks lightly, one leak can cause a lot of damage! It’s important to call a professional ASAP before a small problem turns into a big one. Visit our website to find out more or call us at 1300 658 007 for more information. 

How to Fix A Leaking Shower Head?

A leaking shower can increase your water bill exponentially, not to mention the dripping sound you can hear coming from your ensuite while you try to sleep is just plain annoying. A leaking shower, while seemingly harmless, can ruin the structural integrity of your home. For this reason it is imperative that you determine the cause of a leaking shower as early as possible.
There are various causes for a leaking shower, but identifying them can be a challenge in and of itself. 

With the help of some tools you can track down the cause of your leaking shower at the source.

  1. Remove the Shower Head
A loose shower head is perhaps the most common cause of leaks. Tighten the shower head and check if the leak stops. If not, remove the shower head. To prevent damaging your shower fixture use a towel as a protective layer before unscrewing the head using a wrench or a  similar tool.

  1. Checking the O-Ring
Once you have unscrewed the head check the O-Ring. This is a black rubber ring which acts as a seal inside the shower head. Check whether the O-ring has become hard or is damaged in any way. Over time it is not uncommon for O-rings to solidify and crack.

If this is the case, count yourself lucky as a replacement O-ring will have your shower working perfectly again.  All you need is a replacement O-ring (bunnings should have what you seek). 

  1. Inspect the Inside of the Shower Head
If the O-Ring looks fine it is time to pick a screwdriver and remove the shower head faceplate. Look for debris in the face plate which could be obstructing the holes of your showerhead. Often white buildups of calcium cause a blockage causing the shower to leak long after you have turned off the taps. A little elbow grease should do the trick here. If not, you can soak the shower head in white vinegar for 7-9 hours. The vinegar will help loosen the calcium which you can then remover with a brush and hot water.

Great, you’ve identified what you think may have been the issue and remedied it, now it’s time to re-attach the shower head using a towel for protection once more.

If the leak continues after reattaching the shower head it is possible your leak is internal. But before you decide to tear up any tiles like Bob the Builder, Megasealed can provide you with one of our accredited technicians who will take the guesswork out of identifying the leak using our thermal imaging technology.

After identifying the source perhaps the fix isn’t as easy as replacing an O-ring, maybe you have a leaking shower base or something even worse. 

Megasealed provide cost-effective solutions to fix leaks without removing tiles. Simply call 1300 658 007 for a FREE in-home quote today or visit us here

Thursday 19 March 2020

How to Remove and Replace Grout?


How to Remove and Replace Grout?


Ceramic tiles are unquestionably one of the most durable tiling solutions when it comes to leaky bathrooms. Not only are they the most durable, but they are perhaps the most water-resistant. However, it’s the grout that you use that ultimately determines the life expectancy of any tile.

Most grouts are porous and soft and therefore prone to stains and damage, but with a little maintenance you can prevent your grout from future damage. However, if you neglect your grout, repairing it can be a difficult, time consuming and costly task.

Megasealed has you covered with our ‘how-to’ guide when it comes to replacing grout. And with over 23 years under our belt, these are the tried and tested tricks of the trade.

Budding DIY-ers pay close attention.

1. How to clean grout


With the bathroom being one of the most frequented rooms in the house, it is no wonder grout often gets dirty. It is not unusual to see a buildup of soap scum, mould and even dirt in your grout, so the first order of business is to buy a stiff-bristle brush.

Using a strong gumption, a brush and a fair amount of elbow grease you should be able to easily remove any soap scum or dirt from in between your tiles. However, stubborn stains may need some extra attention - Try soaking the tiles in bleach for 10 minutes before you get down to scrubbing - Rinse and repeat until the stain is gone.

This should get rid of mould and stains quick-smart and will leave your tiles looking good as new.

2. How to Remove Grout

If after your initial clean you can still see stains this might mean you have a leak. For more on fixing leaks read our How To Fix A Leaking Shower article and get one step closer to that hassle free bathroom. 

The most foolproof way of preventing any further damage is to remove and replace the grout. The easiest way to remove grout is with specialised de-grouting tools. Everything you need should be supplied at your local bunnings, including:

  1. Protective gloves and goggles
  2. A multi-tool to remove grout, and
  3. A grout saw to remove the hard to reach grout without damaging the tiles
Pro Tip: For DIY-ers, an oscillating multitool is your ‘top of the line’ de-grouting tool, but this might be hard to get if you’re on a strict budget.

3. Applying Epoxy Grout


After all the grout is removed it’s time to prepare a grout mixture. Megasealed’s two-part epoxy grout Megagrout is the top of the line grout mixture and comes in a range of colours to suit all bathrooms.

Then hire a grout float to deeply fill the tile joints, waiting up to 30 minutes before you remove any excess grout mix. In most cases grout takes up to 36 hours to dry, but to be totally safe we suggest letting it set for a full 48 hours before you use your bathroom again.

While this sounds simple enough, this can be a tough task for even the handiest of men, so why not get in touch with us here. Megasealed is the largest company in the industry. We have the most ISO accredited technicians handling the largest volume of clients across the country.

Plus we have one of the fastest turn-around services in the business. We complete most jobs within 48 hours of quoting – helped by having consultants and technicians in your local area.
To arrange for your local Megasealed consultant to do an in-home no obligation free quote call us on 1300 658 007.

Does My Balcony Need Waterproofing?


Does My Balcony Need Waterproofing?




There’s nothing Aussies love more than having a beer on the balcony, patio, veranda, porch or any other word you use to describe that perfect outdoor area that the summer sun hits just right each time you’re ready to clock-off. Unfortunately, due to a balconies exposure to the elements they are  susceptible to waterproofing failures. Therefore, every Aussie should understand the consequences of untreated balcony leaks.

There are a multitude of reasons why leaking balcony repairs might be necessary including: dodgy construction work, lack of maintenance, poor water drainage, the failure of membranes and natural building movements, just to name a few.

Here’s our guide on how to repair a leaking balcony.

Prevention

It goes without saying that prevention is better than cure. So, when your balcony is being constructed the correct care and preparation must go into planning. And while we love the “my-father-built-this-house-with-his-bare-hands” sentiment, perhaps this is one you best leave up to the professionals. Megasealed’s team of professionals with over 25 years experience adhere to the building codes and compliance standards from the outset because we understand that shortcuts can result in some very costly headaches. Improper balcony waterproofing leads to leaks, compromises the structural integrity of a home, and can eventually lead to collapse.

Perhaps your best course of prevention is Megasealed’s cost-effective ISO accredited sealing system, in which they apply a sealant both over and under leaking tiles to produce a full seal (watch the step by step video here). Get it done right the first time and save you and your family time and money in the long run. 

Cure

If you don’t have the luxury of building your balcony from scratch and cure is your only option, make sure you do a thorough inspection for balcony leaks. Better yet, get a Megasealed technician to save you money and trouble by using our revolutionary Thermal Imaging Water Detection Technology to identify those sinister leaks you can’t see, and catch moisture intrusions at the source.

After leak detection it is important to act fast as to not cause further damage to your waterproofing membrane. That’s why Megasealed has you covered with our cost-effective Standard Service in which we use our award-winning liquid repair membrane sealant Megabloc, to help repair damaged membranes and have you waterproof in no time.

Alternatively, you can get our Tile Over Tile Service which includes priming, waterproofing and retiling the existing surface to elevate your balcony to the next level. Call Megasealed at 1300 658 007 to get a FREE quote today or visit Megasealed here and let us help you get back to enjoying golden hour with a beer in hand.

Tuesday 17 March 2020

How To Determine The Cause Of A Leaking Shower




How To Determine The Cause Of A Leaking Shower

www.megasealed.com.au


Is your water bill looking a little more expensive than usual? Is your bathroom floor mysteriously damp? Is there mould forming in those hard to reach places? Does something smell a little musty at home? If you answered yes to any of these, chances are you have a leaking shower.

A leaking shower base can ruin the integrity of your home’s foundations. Not to mention it causes a build up of mould, chipped paint, decaying grout and can make your bathroom look like a total mess. Too often we go about de-moulding, re-paining and re-grouting without actually remedying the problem at the source - The leak! So, to save you money and time we have compiled this list of how to fix your once beautiful bathroom, starting at the source.

There are many possible reasons your shower might be leaking, including:
  A blockage in the plumbing system i.e. pipes
  A broken waterproofing membrane
  The use of poor quality products during the construction process
  A problem with the shower head

Repairing a leaking shower often ends up being quite expensive depending on who you get to do the job. With Megasealed’s range of services including our Standard Service or our Tile Over Tile Service you can not only pick the perfect shower waterproofing solution, but also one that is cost effective. But keep in mind this all depends on how early you identify the problem.

We can not stress enough that leak are time sensitive. The longer it takes you to identify the problem, the more money it will cost to fix. So stay on top of your bathroom maintenance by checking for these signs:
  A dripping sound - Simple, but effective
  Dampness in and around the shower
  Accumulation of mould on the floor, walls and ceiling
  Cracks appearing in the paint
  Cracks in the grout
  Loose tiles

If you spot any of the above, then contact Megasealed to get quality service without breaking your bank. 

Megasealed's standard service provides you with a complete shower seal:
  1. Starting with a comprehensive leak check using non-invasive thermal water-leak technology. 
  2. A wall-to-wall degrout, focusing on problem areas such as a leaking shower base. 
  3. A full waterproof membrane repair using their award winning non-invasive waterproofing solution, Megabloc. 
  4. And finally, a shower regrout applying an extremely durable two part epoxy grout to shower wells, perimeter joints and the leaking shower base.



Megasealed will provide you with ISO accredited experts who will help you find the right solution for your leaking shower. So, call us on 1300 658 007 for a free quote today or visit us here.